Home › Blog › Home & Building
How Much Does It Cost to Build a House in 2026? Cost Per Square Foot and Real Examples
Most new houses in the US cost $150 to $300 per square foot to build, so a 2,000 square foot home often lands between $300,000 and $600,000 before the land. Where you build, the finishes you pick and the builder you hire decide where in that range you end up. This guide shows the typical numbers, a state-by-state comparison, what each part of the house costs and the extras people forget.
Want the number right now? Use the House Construction Cost Calculator, it is free and nothing you type leaves your device.
The short answer
- Per square foot. About $150 to $300, and over $350 for expensive areas or custom homes. Autodesk puts the median near $166 per square foot (2025).
- Whole house. Angi data quoted by Redfin gives an average of about $323,000, with most homes between roughly $139,000 and $531,000.
- Not included. Land, site preparation, utility hookups, demolition and furniture are usually extra.
- Labor. Roughly 30% to 50% of the total cost of building a home.
The simple formula is square feet × cost per square foot = build cost. A 2,000 square foot house at $175 per square foot is 2,000 × $175 = $350,000.
Build cost by house size
This table is plain arithmetic: house size times a low, middle and high cost per square foot. Use it to see how quickly size changes the bill.
| House size | At $150 / sq ft | At $200 / sq ft | At $250 / sq ft |
|---|---|---|---|
| 1,500 sq ft | $225,000 | $300,000 | $375,000 |
| 2,000 sq ft | $300,000 | $400,000 | $500,000 |
| 2,500 sq ft | $375,000 | $500,000 | $625,000 |
| 3,000 sq ft | $450,000 | $600,000 | $750,000 |
Smaller houses often cost more per square foot, because every house needs a kitchen, bathrooms and a heating system no matter how small it is. Those expensive rooms are spread over fewer square feet.
Cost by state
Autodesk's 2026 estimates for a 2,000 square foot house show how much location matters. Labor rates, material delivery, permit rules and demand all change from state to state.
| State | Average price, 2,000 sq ft | Per sq ft (our math) |
|---|---|---|
| Mississippi | $287,000 | $143.50 |
| Alabama | $291,000 | $145.50 |
| North Carolina | $297,000 | $148.50 |
| Oklahoma | $300,000 | $150.00 |
| South Dakota | $301,000 | $150.50 |
| Texas | $309,000 | $154.50 |
| Vermont | $322,000 | $161.00 |
| California | $363,000 | $181.50 |
| Washington | $363,000 | $181.50 |
| Rhode Island | $372,000 | $186.00 |
| Hawaii | $431,000 | $215.50 |
The gap between the cheapest and most expensive state in this list is about $144,000 for the same size house. Different sources use different methods, so treat state figures as a starting point and ask local builders for real quotes.
Where the money goes
Rocket Mortgage figures quoted by Redfin show typical ranges for the main parts of a build:
| Part of the build | Typical cost |
|---|---|
| Foundation | About $9,000 (slab $8,000 to $15,000, basement $20,000 to $80,000 per Autodesk) |
| Framing | $20,000 to $50,000 |
| Exterior finishes | $25,000 to $60,000 |
| Plumbing and electrical | $30,000 to $75,000 |
| Interior finishes | $50,000 to $175,000 |
| Outdoor living space | $4,150 to $11,190 |
Interior finishes (floors, cabinets, counters, paint, fixtures) have the widest range. That is good news, because finishes are the part you can most easily adjust to hit your budget.
One Autodesk example for a typical house lists framing at $49,000, foundation at $21,000, plumbing at $16,000, roofing at $12,500, electrical at $12,000 and HVAC at $10,000. Real prices depend on your plan and your area.
Costs people forget
Averages usually cover only the construction itself. Budget separately for:
- Land. A desirable lot can cost over $100,000, while rural land may be about $2,000 an acre.
- Site work. Excavation $1,500 to $10,000, grading $1,000 to $3,300, clearing $1,400 to $6,200, surveying $1,800 to $6,500 (Angi figures via Redfin).
- Utilities. Sewer line $1,400 to $5,800 and an electrical line $4,000 to $20,000.
- Permits and inspections. Permits average $150 to $2,000, and inspections about $300 to $400.
- Design. A custom architect can charge 8% to 12% of construction cost. Ready-made plans cost far less.
- Demolition and furnishing. Demolition $6,000 to $25,000 and furnishing $30,000 to $80,000.
- Extras. An indoor pool adds about $95,000 and a porch about $15,000.
A worked example
Here is an illustration for a 2,000 square foot house. The site work and contingency numbers are assumptions chosen to show the method, not a quote.
| Item | Amount |
|---|---|
| Construction: 2,000 sq ft × $175 | $350,000 |
| Site work and utilities (assumed) | $20,000 |
| Permits (assumed) | $2,000 |
| Contingency: 10% of construction (assumed) | $35,000 |
| Total, land not included | $407,000 |
The contingency line matters. Surprises such as rock, bad soil or a price rise are common, and a cushion keeps one surprise from stopping the project. Many builders suggest setting aside 10% to 20%, which is general advice rather than a figure from the sources below.
How long does it take?
Census-based figures quoted by Redfin put the average single-family build at about 7 months: roughly 6.1 months for production homes and 8.9 months for custom homes. By region, the South averages 6.1 months, the West 7.1, the Midwest 7.7 and the Northeast 11.1. Autodesk says a new build can take anywhere from 7 to 24 months once permits, weather and delays are counted. A longer build means more interest and rent, so time is a cost too.
Why costs are different for every house
- Location: labor, permits and delivery vary a lot.
- Size and shape: more corners, roof lines and floors mean more work.
- Finishes: laminate counters cost about $25 per square foot, stone $40 to $120.
- Foundation: slab, crawl space and basement cost very different amounts.
- Materials: prices such as lumber move over time and can be affected by trade policy and demand.
- Builder type: production builders repeat the same plans, which tends to cost less than a one-off custom home.
Want to lower the total? Read How to Save Money Building a House.
How to estimate your own house
- Write down the size you want in square feet. If you know the plot in square yards, multiply by 9.
- Pick a cost per square foot for your state and finish level, using the table above as a guide.
- Multiply to get the build cost.
- Add land, site work, utilities, permits and design.
- Add a 10% to 20% contingency.
- Ask at least three local builders for written quotes and compare them line by line.
The House Construction Cost Calculator does steps 1 to 3 for you and shows sample house plans for your plot size.
Frequently asked questions
How much does it cost to build a 2,000 square foot house?
Most estimates run from about $300,000 to $600,000 for the build alone. At $175 per square foot it is $350,000. Land and site work are extra.
Is it cheaper to build or to buy a house?
It depends on your area and finishes. Redfin reported a median existing-home price of $429,708 in February 2026, and the average build cost it quotes is about $323,000 before land. Add land, permits and a cushion before you compare.
What is the cheapest way to build a house?
A smaller, simple-shaped house with standard finishes, a ready-made plan and several builder quotes usually costs the least.
What is the average cost per square foot to build a house?
About $150 to $300, and Autodesk's 2025 median is about $166. Expensive areas and custom designs can pass $350.
Does the cost include land?
Usually not. Land, site preparation, utility connections and furniture are normally separate.
Sources
- Redfin: How Much Does It Cost to Build a House in 2026?
- Autodesk: How much does it cost to build a house in 2026?
Related calculators
- Concrete CalculatorCubic yards and bags for a slab
- Roofing CalculatorRoof area, squares and shingle bundles
- House Plans GalleryBrowse 8 floor plans with sizes and build costs
- House Construction Cost CalculatorPick a plan by plot size and estimate the build cost
- Percentage CalculatorWork out a 10% or 20% contingency on any budget
- Days Between Dates CalculatorCount the days in your build timeline
Keep reading
- How to Save Money Building a House: 12 Smart WaysHome & Building · 6 min read
- How Much Should You Save for an Emergency Fund?Saving Money · 4 min read
- Break-Even Point Formula: How Many Sales Do You Need?Business · 4 min read
Browse the whole blog, all calculators or all guides.
This article is general information, not financial, construction, engineering or legal advice. Building costs change by location, season and builder, and the numbers in examples are illustrations. Get written quotes from licensed local builders and check your local permit rules. Spotted a mistake? Tell us and we will fix it.